|
Support DHCP Client function. When DHCP is being activated, CYT-100MG could get TCP/IP configuration from DHCP server when system started, including IP address, Default Gateway and DNS
Support RTU Master/Slave and ASCII Master/ Slave 4 operation modes
Auto sensing for 10Base-T or 100Base-T network environment
Support various kinds of web browsers
Allows to be system backup or restored under encripisy way
Up to 4 remote devices IP can be configured
|
► Technical Specification
| CPU |
16 Bits, 100MHZ |
| Memory |
256KB Flash & 2MB SDRAM |
| Watch Dog |
System halt prevention |
| TCP/IP interface |
10/ 100Base-T/Tx1, Automatic MSI/ MDI-xport |
| Serial interface |
RS-232, RS-422, RS-485 |
| Connector interface |
DB9(MALE)/ RJ-45 |
| RS-232 |
TxD, RxD, RTS, CTS, DTR, DSR, DCD,RI,GND |
| RS-422 |
Tx+,Tx-, Rx+, Rx-,GND (Up to 1200 Meters) |
| RS-485 |
Data+, Data-,GND (Up to 1200 Meters) |
| Power output |
Select one power mode
PWR1: DC9~24V(300MA MAX) 2-Pin isolated terminal
PWR2: DC9~24V(300MA MAX) DC power plug |
| Operation temperature |
0℃ ~ 55℃ |
| Operation humidity |
5% ~ 80%RH |
| Storage temperature |
-20℃ ~ 75℃ |
| Surge protection |
15KV ESD |
| Magnetic protection |
Ethernet port 1.5 KV |
| LED indicator |
Power / RXD / TXD / ACT |
| Dimension |
106.5 (Include ear loop) x 115 x 28 mm |
| Weight |
315 g. |
|
|
